For overseas Machine specifications for small-sized electric injection molding machine MEt3 series (100-ton mold clamping force)

Information of machine specifications of MEt3 series with 100-ton mold clamping force

Machine specifications for small-sized electric injection molding machine MEt3 series (100 tons)
Model Units 100MEt III
Injection Injection system - In-line screw
Injection stroke mm 72 96 112 112 128 144 160 128 144 160
Screw diameter mm 20 24 28 32 28 32 36 40 32 36 40 46
Theoretical injection capacity cm3 23 43 69 90 69 103 147 201 103 147 201 266
Standard Injection unit - 1.5H 3.5S -
Injection rate cm3/s 94 136 185 - 92 121 153 188 -
Max. injection speed mm/s 300 150 -
Max. injection pressure MPa 274.5 235.4 182.3 - 274.5 235.4 191.1 156.8 -
Max. injection holding pressure MPa 274.5 196.0 147.0 - 274.5 215.6 171.5 137.2 -
High-speed Injection unit - 2.5H 3.5H 7H
Injection rate cm3/s - 136 185 241 185 241 305 377 169 214 264 349
Max. injection speed mm/s 300 300 210
Max. injection pressure MPa - 274.5 235.2 181.3 274.5 250.0 196.0 161.7 264.0 250.0 215.6 166.6
Max. injection holding pressure MPa - 274.5 176.4 147.0 274.5 225.5 176.4 142.1 264.0 250.0 186.2 147.0
Superhigh speed Injection unit - 2.5U - -
Injection rate cm3/s - 226 308 402 - -
Max. injection speed mm/s 500 - -
Max. injection pressure MPa - 274.5 235.2 181.3 - -
Max. injection holding pressure MPa - 274.5 176.4 147.0 - -
Recovery rate (PS) kg/h 13.9 25.0 41.0 62.0 41.0 62.0 89.0 113.0 62.0 89.0 113.0 172.0
Screw revolution speed min-1 350 350
Nozzle pressing force kN 19.6 24.5
Clamping Clamping system - Double toggle
Clamping force kN 980
Clamping stroke mm 360
Min. mold height mm 150
Max. mold height mm 450[510]
Tie bar clearance (H×V) mm 460x410
Die plate size (H×V) mm 630x580
Ejector force kN 24.5
Ejector stroke mm 100
Other Heater capacity kW 3.45 3.45 5.50 5.85 5.50 5.85 5.85 7.95 5.85 5.85 7.95 11.20
Mold height motor output kW 0.2
Nozzle touch motor output kW 0.2
Machine dimension <L> mm 4100 4100 4100 4173 4440 4541 4624 4742 4541 4624 4742 4814
Machine dimensions <W×H> mm 1115x1582 1149x1582
Power source - Three-phase AC200V/200, 220V±10% 50Hz/60Hz
Main breaker capacity A 125(2.5U:150)
Total electric capacity KVA 1.5H:13 3.5S:14
2.5H:20 3.5H:27
2.5U:35 7H:29
Cable size
200V Class[400V Class *1]		 mm2 1.5H,2.5H:22[14] 22[14]
2.5U:38[14]
Machine weight t 3.8 4
NOTES
  1. The figures are subject to change without any legal obligation on the part of the manufacture.
  2. The specifications are expressed in SI.
    (1MPa=10.2kgf/cm2 1kN=0.102tonf)
  3. The maximum injecting pressure and the maximum holding pressure are attainable maximum set values. There values may be limited by molding conditions and cycle time.
  4. The injection rate and the maximum injecting speed are calculated values.
    These values may be limited by set injecting pressures.
  5. When a screw with wide diameter is used, some resins may not be accepted.
  6. When the machine is attached with an option, the capacity of the breaker.may be changed.
  7. The values in brackets are applied to machines with options.
    *1.A transformer(option) is necessary on the machine side.

Copyright(C) MITSUBISHI HEAVY INDUSTRIES PLASTIC TECHNOLOGY CO.,LTD. All Right Reserved.